PuT-11 Edge Mower

The MAREDO edge mower mows the edge up to 3.25 inches deep (80mm). Used in combination with the steerable base machine, you can easily and quickly make your edges look great. With the optional vibrating disc, you can easily cut edges under stoney conditions and along paved surfaces.

PuT-20 Scarifier

The MAREDO scarifier utilizes .03" (.8mm) thick hardened steel blades and does a perfect job on fine turf areas. The material is not collected, but after being allowed to dry the material can be collected with the PuT 25. Working depth: 3/4" (20 mm) Working width: 22" (520 mm).

PuT-23 Recip-Corer

The MAREDO reciprocating corer can be equipped with hollow tines up to a core size of 3/8" (10mm); standard 1/4" (6mm) or with 3/16" (5mm) solid needle tines. The maximum working depth is 2 inches (50mm). Depending on ground speed, it creates up to 1,050 holes per sq. yard (1,300 per sq. mtr.).

PuT-30 Vibe-Smoother

The MAREDO Vibe-Smoother works with six vibrating timed plates that can be set to a specific pressure. Due to this vibration, it will clear and smooth all kinds of irregularities on your fine turf which can result in an increase in ball speed of up to 25 percent. Irregularities are smoothed down instead of rolled forward.

PuT-80 Sod Cutter

The MAREDO sod cutter works with two conter moving "L" blades which can cut a width up to 8 inches (20 cm.). Due to these two blades, the operation is very smooth. The depth can be set up to 2 inches (5 cm..). It can also be used as a shovel to cut weeds on gravel paths.

PuT-12 Edge Cutter

The MAREDO edge cutter is a reciprocating "L" knife, cutting up to 5 inches (12 cm) deep. It also cuts the bottom, so you can easily remove the cut edge. For gardens, wider and shallower knifes are available. Utilizing the active steering of the PuT 60, contours can easily be followed.

PuT-21 Vibe-Spiker

The MAREDO Vibe-Spiker is a unique spiker. Six independent spike sections roll over the ground, with a central driven cam shaft adding a vertical vibration to the pinspikes. This allows the spikes to enter the ground easily to a depth of 1.5" (35mm) and leaves a nice hole. Up to 570 holes/sq. yd. (700/sq. mtr.).

PuT-25 Topdressing/Collecting Brush

The MAREDO collecting/topdressing brush is a very efficient brush due to its rotation against the drive direction. Debris is easily picked up and thrown in the collector bag. The topdress material is brushed forward, leaving a clean surface and better filled holes. It also collects cores. Working width 22" (53 cm).

PuT-41 Vibe-Seeder

The MAREDO Vibe-Seeder is an overseeder that plants the seed in the soil. The vibrating spikes roll over the ground and clean the funnels at the same time as they pick up the seed. Seeding rates .03-.41 lbs/100 sq. ft.(.17-2.0 kg/100 sq mtr.)